Reliable Safety REG-FRC-1215 Work Uniform Coverall
Description
Part Code: REG-FRC-1215
| 93% meta aramid 5% para aramid 2% anti static fabric Technical Data Sheet | ||
| Description | Standards/Test Method | Test Results |
| Weight(g/m2) | ISO 3801 | 150GSM ±5 |
| Yarn Count | ISO 2060 | Warp:40S/2 Weft:40S/2 |
| Density | ISO 7211-2 | Warp:67 Weft:52 |
| Dimensional Change | ISO 5077:2007/ ISO 6330:2012 | ≤3% |
| Limited flame spread | ISO EN11612/ ISO 15025:2000 |
No flaming to edge No holing formation No flaming or molten debris afterflame≤2s afterglow≤2s |
| Tear strength | ISO13937-1 | Warp:35N Weft:33N |
| Tensile strength | ISO 13934-1 | Warp:700N Weft: 600N |
| Colorfastness to washing | ISO 105-C06 | 3-4 |
| Colorfastness to crocking | ISO 105-X12 | Dry: 3-4 Wet: 3-4 |
| Colorfastness to light | ISO 105-B02 | 3-4 |
| Abrasion: Martindale | ISO 12947-2 | ≥20000 |
| Shielding Factor | BS EN 1149-3:2004 Method 2 | greater than 0.2 |
| Half Decay Time | BS EN 1149-3:2004 Method 2 | less than 4 seconds |
| Surface Resistance | BS EN 1149-1:2006 | less than 2.5*109Ω |
| Heat Transfer Evaluation | ASTM F2700-08(2013) BY NFPA 2112:2018 | Spaced HTP Rating less than 25 J/cm2 Contact HTP rating less than 12.6 J/cm2 |
| Flame Resistance | ASTM D6413 BY NFPA 2112:2018 | No flaming or molten debris afterflame≤2s char length ≤100mm |
| Heat Resistance | ASTM-F2894 BY NFPA 2112:2018 | No layer ignite No layer melt or drip No layer separate No layer shrinks more than 10% |
Be the first to review “Reliable Safety REG-FRC-1215 Work Uniform Coverall”
Reviews
There are no reviews yet.